| BACK
TO RAGGTOPP
HOW TO
APPLY
| RAGGTOPP Cleaner |
| 1. |
Spray a small section and allow to remain for 5-15 seconds. Gently scrub
using a soft brush. |
| 2. |
Rinse thoroughly. Repeat if necessary. Do not use on plastic windows. |
|
|
| IMPORTANT: CONVERTIBLE TOP MUST
BE THOROUGHLY DRY BEFORE USING RAGGTOPP Protectant! |
| RAGGTOPP Protectant |
| FABRIC TOPS |
| 1. |
Remove any lint, fuzz, or dust with Tacky Vac Roller. |
| 2. |
Spray three light even coats of RAGGTOPP Protectant using gentle
sweeping motion. Do not saturate. |
| 3. |
Allow to dry 10-15 minutes between coats in the sun. Artificial heat can
be used to speed drying time. |
| VINYL TOPS |
| 1. |
Remove any
lint, fuzz or dust with Tacky Vac Roller. |
| 2. |
Spray three
light even coats of RAGGTOPP Protectant and spread evenly using a clean cotton towel or
rag. Do not saturate. |
| 3. |
Allow to dry
10-15 minutes between coats in the sun. Artificial heat can be used to speed drying time. |
| PLASTIC WINDOWS |
| 1. |
Lightly spray both sides of window. |
| 2. |
Wait a few minutes. Buff gently with clean soft cotton towel or rag. |
USE A
CLEAN COTTON TOWEL OR RAG TO WIPE OFF ANY OVER SPRAY |
